palm oil refinery, palm oil fractionation,


(1)Degumming: This is the most important section of hydrate de-gumming, manage the adding water (there is a little P-acid in the water) amount, temperature and add water speed, usually water adding amount is about 3 times of phospholipid content, that is 3-10% oil weight, water temp needs to be higher than oil temp.





(2)Deacidification:This part adopt alkali refining method, that is use alkalis like (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock , then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters like protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye , soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom





(3)Decolorization: In normal situation , there is pigment in the crude oil , we need to using the active clay to absorb the pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away . If you want to get light color oil , you need to add more active clay . That is mean , the customer can accord to his requirement to control the oil color. This process is carried out under the vacuum condition.


Henan Huatai Cereals and Oils Machinery Co., Ltd is a large oil machinery company, we supply oil machine, vegetable oil machine, edible oil machine, palm oil machine, copra oil machine, sunflower seeds oil machine, corn oil machine, peanut oil machine, grain processing machinery, corn mazie deep processing machinery, if you need any oil machine, please contact with us. or email to [email protected]


welcome to visit our website: www.palmoilmachine.com


www.huataioilmachine.com